FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 17–32 of 96 results
NMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices. Compatible With: GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap…
Lowrance TR-120-KIT Set of 1 male and 1 female NMEA 2000r7reg; terminators Specifications: Data Interface: NMEA 2000 Box Dimensions: 2 H x 3 W x 4 L WT: 0.1 lbs UPC: 042194533575
ACM100 Alternating Current Monitor Maretron s ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. The ACM100 can monitor power busses, generators, or utility power. ACM100 output information is then displayed with networked NMEA 2000® equipment such as the Maretron…
Maretron s Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder, along with a red high-brighness LED to indicate an alarm condition. A second green LED indicated that the Alarm Module is powered and ready to be triggered. The audible alarm…
Bilge High Water DetectorPart #: BHW100 Used with SIM100 Switch Indicator Module to detect high bilge water. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner s Manual (pdf)
Attaches to Maretron SIM100 for NMEA 2000 network monitoring Real Test technology allows for functional testing in the field Trouble relay for circuit trouble or detector end of life notification Provides wiring supervision 4-wire detector; mounts to wall or ceiling WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to…
Current Transducer with Cable – 400 Amp Maretron s Current Transducer is used specifically with Maretron s ACM100 Alternating Current Monitor. Features: 400 Amp Includes Cable WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Current Transducer w cable – 400 amp – f DCM100 WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Maretron s DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000 network, so you can turn on and off the relays from any device onboard or remotely running Maretron s N2KViewr software. The DCR100 easily handles resistive DC loads like lights, or…
Maretron s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panelts, and wind generators. The DCM100 can also be used to monitor DC…
Fuel Flow MonitorPart #: FFM100-01 Maretron s FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nearly that of commercial vessel systems costing tens…
Fluid Pressure Monitor Maretron s Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate transducer, the FPM100 reports either…
Fuel Flow Sensor – 2-100 LPH Features: Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH) All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1 4 NPT female threads Nominal K Factor: 1000 pulses L (3785.4 pulses Gal) Cable Length: 1m (3.28 ) Strainer Size: 200 Mesh (If…
Fuel Flow Sensor – 25-500 LPH 6.6-132 GPH Features: Operating Temperature: -40°C to 80°C (-40°F to 176°F) Storage Temperature: -65°C to 170°C (-85°F to 338°F) Port Size: 1 4 NPT Female Cable Length: 1M (3.28 ft) Maximum Viscosity: 1000 cPs Pressure: 68.95 Bar (1000 PSI) Strainer Size: 200 Mesh (If not already installed after fuel…
GPS200 – NMEA 2000 GPS Antenna ReceiverMaretron s GPS200 provides reliable position fixes 10 times per second, accurate boat speed four times per second, and precision time once per second. The GPS200 antenna receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000 Standard. It will directly connect to any…
IPG100 (Internet Protocol Gateway) lets you connect Maretron black boxes (MBB100 s), Maretron touch screens (DSM800 s), PC s, Mac s, tablets, or smartphones to an NMEA 2000 network so you can monitor and control your vessel using Maretron s N2KViewr software. The conventional way of viewing NMEA 2000 information is with a display on…
End of content
End of content
No products in the cart.
